GRP Gratings: The Best Roof Walkway Method
Our GRP Grating for roofs provides excellent drainage due to its open mesh design plus the added advanatge of being anti-slip for level walking surfaces across roof substrates as well as a demarcation route which protects the roofs surface from unnecessary foot traffic and potential damage. Easy to install, lightweight, corrosion resistant, and extremely durable.
In potentially highly trafficked areas of roofing, where regular access may be required for maintenance regimes, GRP roof walkways systems distributes the load evenly on the roof and thus reduces wear and tear on the roof system itself. Can be supplied pre-cut to your specifications or can be cut on site without any hot work permits.
Why GRP Gratings on Roof Walkways ?
Here's why .....
- Highly resistant to wear, tear, impact and abrasion
- Chemical Resistant
- Easy Installation
- Low Carbon Footprint
- Lonf effective service life
Start your project today
GRP Grating Roof Walkways
The perfect access solution on roofs.
The grating system can be raised and laid upon a pedestal Minimum 10mm or rubberised feet Max 10mm.
No need for mechanical fixings.
GRP Grating allows opportunities for increased safety. Roof wlakway systems should conform to safety regulations, preferbly minimum width 600mm. The width of the roof walkways may be reduced to 500mm when justified by a risk assessment due to machinery or the environment if the platform or walkway is used occasionally and the reduction is made for only a short distance, Available in Grey, Green or Yellow or any RAL colour Grating can be produced for this application.
The Perfect Roof Walkway Design
"Due to GRP Grating being lightweight at 12.3kg per square metre on a 25mm deep grating it made it quick and easy to install. No special tools needed, just clamping Rubber Feet to the base and set it down. Perfect."
Alex Willgrass MD - Infiniti Scaffolding Ltd - N.Yorks