Bespoke Marine Pontoons and Walkway
The obvious and most practical choice when deciding on pontoon material. GRP composite is non-corroding, non-conductive, non-slip and a no-brainer.
In environments where steel would be used underfoot, such as in marinas, public access points and more, GRP grating is a safer and more durable alternative.
GRP is the most durable, corrosion-free and anti-slip material used in Marinas and Harbours etc not only to create a safer environment but to reduce risks to all. GRP is the best alternative to steel, as it is both lightweight, slip-resistant and doesn’t corrode under bad weather or exposure to water.
MINIMESH GRATING IS USED HERE:
- Production areas
- Walkways
- Loading bays
- Access ramps
- Factory production lines
- Entrance ways
- Worker access to machinery
- Footbridges
- Pedestrian bridge
CONTACT US ABOUT PONTOONS TODAY
Competitive Pricing
Personal Bespoke Service
Made-to-Measure Products
Perfect for Jetties/Pontoons
GripClad's GRP Mini-Mesh Grating is often recommended at 30mm thick. The mesh configuration is 20/20mm pitch - mid bar to mid bar with a 12/12mm internal square opening.
Comfortable to walk upon with a light gritted surface to prevent slipping even when the surface is wet
Our Marina Grating has been successfully installed in both inland water and coastal environments, including access bridges, berthing stations, slipways, yacht harbours & sailing clubs, marinas, jetties, floating pontoons and gangways. It’s corrosion-resistant and impervious to both salt and fresh water.
GRP MINI MESH SIZES
30mm & 38mm Thick Panels sizes:
3007mm x 1007mm
3007mm x 1247mm
4047mm x 1247mm
- Light Grey - Stocked Colour
- Green - Stocked Colour
- Beige - Stocked Colour ( Only 30mm)
- Or your chosen RAL with a 10 week's lead time
We have specialist fixings for MiniMesh Grating - Dome Disks, M- Clips and Recess plates available.
GRP MINI MESH FOR MARINAS
At marinas, where there is a high risk of sea spray, as well as access for tradespeople, members of the public and seafarers, Mini Mesh Grating ensures good drainage while preventing small items from falling through the mesh. It’s also more comfortable to walk on, is suitable for all footwear, and is also suitable for pushing wheels on, such as pushchairs, wheelchairs, pallets and trucks.
Because of the size of the holes within Mini Mesh Grating, it’s perfect for ensuring pedestrians have a safe, anti-slip access route to a variety of areas.
We have had plenty of praise which is usually along the lines of ...
“This is an exceptional product, unlike what we have used in the past. GripClad were able to deliver to our maintenance team already cut to size. No cutting involved so we were able to set these down in a matter of a few hours, and then the visiting public and members could walk on them without fear of slipping.”
The best thing about Mini Mesh is...
it has all the benefits of our Standard Mesh Grating but with smaller 12mm x 12mm holes preventing small objects from falling through and complying with BS EN14122 Category B and the European 15mm ball falling test requirement. It makes it an excellent choice for pedestrian access ramps, catwalk grating or walkways in industrial facilities and chemical plants, especially on multi-level access platforms where objects falling through the mesh could land on people below.
And also.....
- Easy to install
- Immediate protection from slips
- Highly functional
- Tough and durable
- Lightweight
- Easy to cut or we can do it for you
- zero maintenance
- no painting
- ask for a sample
Get your feet wet and contact us
Competitive Pricing
Personal Bespoke Service